NETWORK & DEVICES
Every router, before your customers call.
Connect MikroTik routers in minutes, watch health and traffic across your network, and get alerted before customers notice a problem.
Start free trial14 days free · No credit card required · Cancel anytime
From connected to controlled in six steps
A router goes from unboxed to fully monitored without a public IP, port forwarding or firewall rules.
Connect the router
Configure speed profiles
Monitor health and traffic
Get alerted on thresholds
Resolve remotely
Back up and track drift
How network management works
Connect a router in minutes.
Add a MikroTik router and it appears on your dashboard. No public IP required, no port forwarding, no firewall rules to manage.
- Works even without a public IP
- RouterOS 6.49+ and 7.x supported
- Automatic reconnection after power loss
Know first when something breaks.
Monitor CPU, memory, traffic and uptime across every router. Set thresholds and get alerts by SMS, WhatsApp or email before customers notice.
- CPU, memory, traffic and uptime monitoring
- Configurable alert thresholds per router
- SMS, WhatsApp and email notifications
- Uptime and incident history
Restore any router to a known good state.
Automatic configuration backups run on a schedule. Compare any two snapshots to see what changed, and roll back in one click when a change causes trouble.
- Scheduled automatic config backups
- Side-by-side diff between any two snapshots
- One-click rollback to a previous config
- Drift detection when configs change unexpectedly
Access any router without a site visit.
Open a remote terminal, Winbox or web session to any router through a secure tunnel. No public IP or VPN setup needed on your side.
- Terminal, Winbox and web access
- Secure tunnel without a public IP
- Session audit trail
Manage customer devices remotely.
Provision and monitor customer routers and ONTs through TR-069. Push firmware, run diagnostics and resolve issues without a site visit.
- TR-069 device provisioning
- Firmware management and campaigns
- Remote diagnostics
- Wi-Fi configuration and password resets
See live traffic across your network.
Watch bandwidth usage per router, per link and per subscriber in real time. Spot congestion, plan upgrades and verify that speed profiles are working.
- Per-router and per-subscriber traffic
- Real-time and historical views
- Speed profile verification
Network capabilities
- MikroTik router management
- Router monitoring (CPU, memory, traffic)
- Alert thresholds and notifications
- PPPoE server management
- RADIUS authentication
- Speed profiles and bandwidth control
- Fair usage policies (FUP)
- Static IP management
- IP address pools
- Network map
- Site management
- Bridge device management
- TR-069 / CWMP device management
- Firmware management
- Remote diagnostics
- SNMP monitoring
- Uptime tracking
- Configuration backup and rollback
- Drift detection
- Remote terminal and Winbox access
- Live traffic monitoring
- CSV and JSON export
Works with
Routers & access
- MikroTik RouterOS
- Any RADIUS-capable access gear
Customer devices
- TR-069 / CWMP managed CPE
Monitoring
- SNMP-enabled devices
Frequently asked questions
Which routers does DataRadius support?
MikroTik routers running RouterOS 6.49 or later, including 7.x. Any RADIUS-capable access device works for authentication.
Do I need a public IP for my router?
No. The router connects outbound, so it works even without a public IP and behind any firewall.
Can I manage customer routers remotely?
Yes. TR-069 lets you provision, monitor and update customer routers and ONTs without visiting the site.
How are speed changes applied?
DataRadius sends a RADIUS Change-of-Authorization to the router. The new speed takes effect immediately without dropping the session.
What alerts can I set up?
CPU, memory, traffic and uptime thresholds. Alerts are sent by SMS, WhatsApp or email. You configure the thresholds and channels.
How do configuration backups work?
DataRadius takes automatic snapshots on a schedule. You can compare any two snapshots side by side and roll back to a previous configuration in one click.